ENGLISH
WIDE LCD PANEL TV INSTRUCTIONS
LT-32A1
GGT0353-001A-H
0610GLT-NF-MT
© 2010 Victor Company of Japan, Limited
Safety Precautions
Thank you for buying this JVC LCD panel television.
To make sure you understand how to use your new TV, please read this manual thoroughly before you begin.
• Follow this manual regarding setup!
• Never insert the power cord by wet hand!
- It may cause a fatal electric shock.
• Keep the TV set away from direct sunlight!
- TV set can be damaged.
- Connect only to a 110-240 V, 50/60Hz AC outlet.
• Make enough room for inserting and removing the power
plug!
• Place the TV set in a neat and dry place. Do not place the
product close to source of steam, heat, moisture or oil.
Because it may cause a fire hazard or electric shock hazard!
• Don’t touch an external metal part of the TV set!
- It may cause an electrocuted.
• Place the TV as close to the outlet as possible!
- The main power supply for this TV is controlled by inserting or removing
the power plug.
• Never cut or damage the power cord!
- If the AC plug is not the right shape, or the power cord is not long
enough, use an appropriate plug adapter or extension cable. (Consult
your retailer)
• Unplug the power cord when going out!
- The power buttons on the remote control and the TV unit cannot
completely turn off the TV. (Make appropriate arrangements for
bedridden people.)
10
10
• For keep a distance from potential ignition
sources to the components or part in side TV
set, customer should install TV set with a stand
within ± 10 perpendicularly degree.
• Never dismantle the rear panel!
- It may cause an electric shock.
• Do not allow the TV to fall!
• Never obstruct the ventilation holes!
- Do not rest your elbows on, or allow children to hang from the TV.
- There is a risk that the TV will fall and cause injuries.
- Make use of the hole on the back of the stand to prevent
the TV from falling easily.
- It may cause overheating or a fire.
• Handle LCD panel with care!
- Use a soft, dry cloth when cleaning.
Plane
• Never try repair the TV yourself!
- If the problem cannot be solved in “Troubleshooting” unplug the power
cord and contact your retailer.
• If a television is not positioned in a sufficiently stable
location, it can be potentially hazardous due to falling. Many
injuries, particularly to children, can be avoided by taking
simple precautions such as:
- Using cabinets or stands recommended by the manufacturer of the
television.
• If the TV is damaged or behaving strangely, stop
using it at once!
- Unplug the power cord and contact your retailer.
• Never place anything on the TV!
- Placing liquid, naked flames, cloths, paper, etc. on the TV may cause a
fire.
• Never expose to rain or moisture!
- To prevent fire or electric shock, never allow
liquids to enter the unit.
- Only using furniture that can safely support the television.
- Ensuring the television is not overhanging the edge of the supporting
furniture.
- Not placing the television on tall furniture (for example, cupboards or
bookcases) without anchoring both the furniture and the television to a
suitable support.
- Not standing the television on cloth or other materials placed between
the television and supporting furniture.
- Educating children about the dangers of climbing on furniture to reach
the television or its controls.
• To prevent accidents, firmly attach the TV stands to the TV
shelf before using microphone.
• Make sure that the subwoofer is in good condition before
installing it on the TV.
- If the subwoofer has leakage current, it may damage the TV or cause
electric shock.
• Never insert objects into the cabinet
openings!
- It may cause a fatal electric shock.
- Take care when children are near.
• Hold the TV so as not to scratch the
screen!
- Do not touch the screen when carrying the TV.
• Do not carry the TV on your own!
- In order to prevent accidents, ensure that the TV
is carried by two or more people.
• For more details on installation, usage and safety ➔ Consult
your retailer.
Care when setting
■ Power requirements
• Connect the power cord
• If the microphone is installed,
should be lock it’s cable follow
picture.
• To prevent the TV from falling thread the
belt through the hole on the back of the
stand and secure it to the TV rack.
200 mm
only to a 110-240V, 50/60Hz
AC outlet.
■ Installation requirements
• To avoid overheating,
ensure the unit has ample
Hole for belt
150 mm 50 mm
150 mm 50 mm
Belt
(not provided)
room.
Screw (not provided)
* Please see how to set up the TV and connection in GGT0356-001A-H.
1
Initial Settings (continued)
If you select Country Area to “Area-1”
If you select Country Area to “Area-2”
Select the teletext language group.
Select Air or Cable.
1. Select
4
4
Set Up
Set Up
1. Select
OK
> Teletext Language
> Auto Program
OK
Group-1
Group-2
Group-3
Group-4
Group-5
Air
Cable
2. Set
Automatically register channels (Auto Program).
Searching for the channels (Auto Program)
5
6
5
6
Set Up
Set Up
OK
> Auto Program
>> Auto Program
CH 40
CH 40
5%
5%
Check what was registered.
Check what was registered.
OK
Set Up
OK
Set Up
> Edit
> Channel Summary
PR
ID
CH / CC
CH 02
CH 03
CH 47
CH 76
CH 12
CH 09
CH 05
CH 02
CH 15
CH 28
CH / CC
CH 02
CH 03
CH 04
CH 05
CH 06
CH 07
CH 08
CH 09
CH 10
CH 11
ID
Skip
01
02
03
04
05
06
07
08
09
10
– – – – – –
– – – – – –
B B C A B C
A B C D E F
– – – – – –
– – – – – –
– – – – – –
– – – – – –
– – – – – –
– – – – – –
– – – – – –
– – – – – –
B B C A B C
A B C D E F
– – – – – –
– – – – – –
– – – – – –
– – – – – –
– – – – – –
– – – – – –
• If you want to set undesired channels
to be skiped, follow Channel Summary
function in Set Up menu.
• If you want to edit channel, follow Edit
function in Set Up menu.
Yes
Yes
Using the TV’s Menu ---> Area - 1
-%.5
2 / 3 Select Main menu.
(Picture / Sound / Features / Set Up)
Display MENU.
Picture
5 / ∞ Select sub menu.
Picture Mode
Backlight
Contrast
Brightness
Sharpness
Colour
Tint
White Balance
Features
Soft
2 / 3 Change setting.
When 3 is shown.
3 Display function setting.
5 / ∞ Select function.
2 / 3 Change setting.
Warm
46ꢀ6)$%/
-%.5
OK
or
Exit from Menu.
Confirm after setting.
• Please see “Menu operation guide” at the bottom of menu on-screen.
Picture Mode
Backlight
Contrast
Brightness
Sharpness
Colour
Select the picture as you like. (Standard / Soft / Bright)
Darker <--> Brighter
Lower <--> Higher
Darker <--> Brighter
Softer <--> Sharper
On Timer
Turns on the TV from standby mode.
PR Select a channel. (01 - 99)
On Timer Set a time. (00:00 - 12:00)
Sleep Timer
Turns off the TV to standby mode. (Off / 10 / 20 / ...120)
Channel Guard Stop children from watching specific channels.
Blue Back
Lighter <--> Deeper
Reddish <--> Greenish *Only NTSC
Display a blue screen and mute the sound when the
signal is weak or absent. (Off / On)
Tint
White Balance Select the white balance of the picture. (Cool / Mid / Warm)
Features Finer picture adjustment
Clear SD For clearly picture (Off / Mode-1 / Mode-2)
Digital VNR
Child Lock
Disables the side control buttons of the TV. (Off / On)
Auto Shutoff Set the power to turn off if no TV singnal (RF) is
received and no operation is performed for about 15
Reduces the amout of noise in original
picture. (Off / On)
minutes. (Off / On)
(Blue)
Favourite Setting
Delete the favourite channel that you registered by
.
Colour Management For natural - looking pictures. (Off / On)
Picture Management Fix bright / dark pictures. (Off / On)
Power Lamp Sets power lamp lighting while the TV is on. (Off / On)
Eco Mode
Dynamic Backlight
Reduces the brightness of the backlight
when the screen is dark. (Off / On)
Select an appropriate colour system.
(Auto / PAL / SECAM / NTSC 3.58 / NTSC
4.43 / PAL-M / PAL-N)
Adjust picture contrast to match your room brightness.
(Off / Eco-1 / Eco-2 / Max-Eco)
Colour System
Auto Program Automatically registers channels.
Edit / Manual Move
Move a channel position by 2 and Adjust
Zoom
Change the aspect ratio.
(Auto / Regular / Panoramic /14:9 Zoom /
16:9 Zoom / 16:9 Zoom Subtitle / Full)
by 3 / 4.
(Red)
ID
Edit a channel name by
.
Insert a channel by (Green)
.
Insert
Stereo / I■II
Select the stereo, mono or bilingual language.
(I / II / O / m / Mono)
Select a CH/CC by 3 / 4.
Sound Meister Set sound theme to match your listening source.
Enter number by 0-9 buttons.
(Off / Dynamic / Pure / Living)
Delete a channel by (Yellow)
.
Delete
Bass
Compensates low frequencies to widen the
frequency band. (Weaker <--> Stronger)
Compensates high frequencies to widen the
frequency band. (Weaker <--> Stronger)
Expands the stereo sound naturally.
(Narrower <--> Wider)
(Blue)
(Red)
Manual
Register a new channel by
Beginning channel search by
.
and (Green)
.
Treble
Channel fine tunning by (Yellow) and
.
(Blue)
Surround
If the picture or sound is unnatural by
for select a system.
Select your desired on screen display language.
Balance
Voice Enhancer Uses sound enhancement technology. (Off / On)
Al Volume Prevent sudden increase or decrease of sound. (Off / On)
Left Stronger <--> Right Stronger
Language
Subwoofer Out Chooses to connect subwoofer. (Off / On)
Subwoofer Level Adjusts sound level of your subwoofer.
(Lower <--> Louder)
Video-2 Setting Switch between video and component signal.
(Video / Component)
Rocket Start TV can turn on quickly. (Off / On)
• When Rocket Start is On, power consumption at
•
When Subwoofer Out set to On, you can adjust
Subwoofer Level.
standby mode will more than normal standby mode.
Select Teletext language group.
(Group-1 / Group-2 / Group-3 / Group-4 / Group-5)
Karaoke
Karaoke
You can enjoy to reduce the vocals for your own karaoke.
Chooses to reduce the vocals.
Teletext
Language
(Off / Mode-1 / Mode-2)
HDMI Setting Setting for HDMI input. (Size / Audio)
PC Setting Setting for PC input. (Auto / PC Position / Phase / Pixel)
(continued)
Main Volume
Microphone Volume
Adjusts volume level. (Lower <--> Louder)
Adjusts volume level of microphone.
(Lower <--> Louder)
3
Using the TV’s Menu ---> Area - 2
Picture Mode
Backlight
Picture
Brightness
Detail
Select the picture as you like. (Standard / Soft / Bright)
Darker <--> Brighter
Lower <--> Higher
Darker <--> Brighter
Softer <--> Sharper
On Timer
Turns on the TV from standby mode.
CH Select a channel. (Air : CH02 - CH69 ,
Cable : CC01 - CC125)
On Timer Set a time. (00:00 - 12:00)
Turns off the TV to standby mode. (Off / 10 / 20 / ...120)
Sleep Timer
Channel Guard Stop children from watching specific channels.
Blue Back
Color
Tint
Lighter <--> Deeper
Reddish <--> Greenish *Only NTSC
Display a blue screen and mute the sound when the
signal is weak or absent. (Off / On)
Disables the side control buttons of the TV. (Off / On)
White Balance Select the white balance of the picture. (Cool / Mid / Warm)
Features Finer picture adjustment
Clear SD For clearly picture (Off / Mode-1 / Mode-2)
Digital VNR
Child Lock
Auto Shutoff Set the power to turn off if no TV singnal (RF) is
received and no operation is performed for about 15
Reduces the amout of noise in original
picture. (Off / On)
minutes. (Off / On)
(Blue)
Favorite Setting
Delete the favorite channel that you registered by
.
Color Management For natural - looking pictures. (Off / On)
Picture Management Fix bright / dark pictures. (Off / On)
Dynamic Backlight
Color System
Zoom
Power Lamp Sets power lamp lighting while the TV is on. (Off / On)
Eco Mode
Adjust picture contrast to match your room brightness.
(Off / Eco-1 / Eco-2 / Max-Eco)
Reduces the brightness of the backlight
when the screen is dark. (Off / On)
Select an appropriate color system.
(Auto / NTSC 3.58 / PAL-M / PAL-N)
Change the aspect ratio.
Auto Program Automatically registers channels.
Channel
Summary
(Red)
Skip
Cancel
ID
Skip the channel by
.
Cancel the skip channel by (Green)
.
(Auto / Regular / Panoramic /14:9 Zoom /
16:9 Zoom / 16:9 Zoom Subtitle / Full)
(Yellow)
Edit a channel name by
.
MTS
Select the stereo and SAP broadcasted programs.
(Stereo / SAP / Mono)
• Channels are to be skipped cannot be selected by
the CHANNEL - / + button.
• The skip can be set to all channels of Air (CH02 -
CH69) and Cable (CC01 - CC125).
Select your desired on screen display language.
Sound Meister Set sound theme to match your listening source.
(Off / Dynamic / Pure / Living)
Bass
Compensates low frequencies to widen the
frequency band. (Weaker <--> Stronger)
Compensates high frequencies to widen the
frequency band. (Weaker <--> Stronger)
Expands the stereo sound naturally.
(Narrower <--> Wider)
Language
Video-2 Setting Switch between video and component signal.
Treble
(Video / Component)
Rocket Start TV can turn on quickly. (Off / On)
• When Rocket Start is On, power consumption at
standby mode will more than normal standby mode.
Closed Caption Select the desired caption or text channel.
Surround
Balance
Voice Enhancer Uses sound enhancement technology. (Off / On)
Al Volume Prevent sudden increase or decrease of sound. (Off / On)
Subwoofer Out Chooses to connect subwoofer. (Off / On)
Subwoofer Level Adjusts sound level of your subwoofer.
Left Stronger <--> Right Stronger
Closed
Caption
Caption
Select to view close caption or text
information. (Off / CC / Text)
Select the desired caption.
(CC1 / CC2 / CC3 / CC4)
Select the desired text channel.
(T1 / T2 / T3 / T4)
(Lower <--> Louder)
Text
•
When Subwoofer Out set to On, you can adjust
Subwoofer Level.
• Closed Caption is not available for component
signal.
Karaoke
Karaoke
You can enjoy to reduce the vocals for your own karaoke.
Chooses to reduce the vocals.
(Off / Mode-1 / Mode-2)
Adjusts volume level. (Lower <--> Louder)
HDMI Setting Setting for HDMI input. (Size / Audio)
PC Setting
Setting for PC input.
(Auto / PC Position / Phase / Pixel)
Main Volume
Microphone Volume Adjusts volume level of microphone.
* Please see CH/CC List in GGT0356-001A-H.
(Lower <--> Louder)
Useful functions
Channel Guard : Stop children from watching specific channels. Karaoke : You can enjoy to reduce the vocals for your own karaoke.
1 Select “Channel Guard”
1 Select “Karaoke”
1. Select a number
1. Select
Features
Sound
0
> Set ID No.
Karaoke
OK
OK
2. To the next column
3. Set
2. Adjust
3. Finish
Karaoke
Main Volume
Microphone Volume
Off
0
0
0
0
Chooses to reduce the vocals.
Off : Normal sound of song
Mode-1 : Only sound of music
Mode-2 : To sing, accompanying with sound of song
• Karaoke function works only for stereo sound system.
• If using Karaoke disc, users must choose to remove the
vocals from the player.
Karaoke
2 Select a channel and lock it ( : locked)
Lock / Release
1. Select a
channel
Features
(Blue)
>> Channel Guard
PR
01
02
03
04
05
06
07
08
09
10
ID
CH / CC
CH 02
CH 05
CH 47
CH 09
CH 11
CH 07
OK
SAT
– – – – – –
BBC
IEEE
APL
DANY
Main Volume
Adjusts volume level. (Lower <---> Louder)
Microphone Volume Adjusts volume level of microphone.
(Lower <---> Louder)
• Micophone Volume is available when plug in microphone.
• Microphone to be used with the “Karaoke” function of JVC must
be of “HIGH GRADE LOW NOISE MICROPHONE CABLE” type;
otherwise, noise will result.
• View a locked channel by use the numerical buttons to enter the channel
number. When appeare, press “Display” button and enter your “ID No.”
Subwoofer out : You can enjoy subwoofer sound from Subwoofer out.
1 Select “Subwoofer Out”
Freeze : Take snapshots of the screen.
Sound
1. Select
Stereo / I II
Sound Meister
Balance
Voice Enhancer
AI Volume
I II
Mono
Cancel
OK
OK
2. Adjust
3. Finish
1
Off
Off
On
OK
Press “
” again,
Subwoofer Out
Subwoofer Level
Karaoke
or change the
channel.
Freeze
still picture
You cannot save or export the snapshot.
Freeze function is not available for HDMI, PC and Component signal.
Chooses to connect subwoofer. (Off / On)
• When Subwoofer Out set to On, you can adjust Subwoofer Level.
• Subwoofer to be used must have a built-in amplifier.
•
•
4
Useful functions (continued)
Eco Mode : Adjusts picture contrast according to the brightness of your room to reduce power consumption.
Off
: Deactivates the function
Eco-1
Eco-2
: Picture is darkened for the 1st level.
: Picture is darkened for the 2nd level (more than the 1st level).
Max-Eco : Only sound is available, no picture (this is to save energy in such situation as when you want to listen to the news while doing other house
works at the same time).
- After choosing Eco Mode as Max-Eco and exiting the Menu, picture will go off in 3 seconds.
- When you want the picture to appear again, press any button on the remote control then function will be reset back to “Off”.
- After unplugging the TV or press “Power off” button, this function will be reset back to “Off”
Viewing Teletext
Watching Video or DVDs
You can watch the Teletext broadcast channel with Text Functions.
1 Select the input source.
AV Select
1. Select
2. Set
0
1
2
3
4
01
1
TV mode <--> TEXT mode
46ꢀ6)$%/
Video-1
Video-2
HDMI
PC
OK
2 Select a Teletext page by press number button (0-9).
• Move up or down a page by CHANNEL +/-.
• Operate the connected device and play video.
List Mode
: Book mark your favourite page.
MODE
(Red) (Green) (Yellow) (Blue)
2 Select “Set Up” Menu.
for select to save
save
Press number button
for enter the number
of page.
HDMI setting
Size
: Setting for HDMI input.
: Auto / 1 / 2
If wrong screen size appears in 480p (525p),
change to “1” or “2”.
• Recall your favourite page by press the colour button.
Hold
: Hold the current page.
• Cancel by press this button again.
Audio
: Auto / Digital / Analogue
If no sound, change to “ Analogue “ or “ Digital”.
Reveal
: Display hidden information.
• example : answer to a quiz, etc
PC Setting
Auto
: Setting for PC input.
: Automatic adjust by 2.
Size
: Double the size of the displayed text.
PC Position
: Adjust screen position by 3 / 4.
Index
Cancel
: Returns to page “100” or a previously designated page.
OK
And set by
.
:
Leave the current page open, while you switch to watch TV.
• Useful when running a page search.
Phase
Pixel
: Sets the focus of screen.
: Adjusts the horizontal feature of screen.
Sub-page
: Display the number of Sub-page.
• Cancel by press this button again.
Troubleshooting
If a problem occurs when you are using the TV, check the below troubleshooting guide before calling for repair.
Poor picture quality
Severe noise or snow
Unnatural colour >>
Adjust “Colour” and “Backlight”.
Check “Colour System”. If “Auto” is selected.
Select the specific colour system manually.
Check the aerial cable and TV connections .
Check the direction of the aerial.
Check the aerial or its cable damaged or not.
Poor sound
Patterns, stripes or noise
Adjust the “Bass” and “Treble”.
Interference caused by devices such as an amplifier, personal computer,
or a hair drier, Move it away from TV.
■
If receiving a poor signal in “Stereo/I II” switch to “Mono”.
Adjust the channel reception using “Manual”.
For HDMI signal, wrong screen size.
Switch “Size” in “HDMI Setting” to “1” or “2”.
For HDMI signal, green and distorted screen
Wait a little for the signal to stabilize when switching the signal format for
an “HDMI” device.
For HDMI signal, No picture / No sound
Use the cable marked with HDMI logo.
Check if the device is compliant with HDMI.
Switch “Audio” in “HDMI Setting” to “Digital” or “Auto” for HDMI devices, or
“Analogue” or “Auto” for DVI devices.
Ghosting (Doubling of images)
Interference occurs caused by signal reflection from mountains or building.
Try to adjust the aerial’s direction or use another antenna.
Cannot turn it on
Ensure the power cord is connected to the AC outlet correctly.
Cannot operate the remote control.
The batteries may be exhausted. Replace with new batteries.
Ensure that you are operation the remote control at less than 7 meters
from the front of your TV.
Remote control stops working
Unplug TV, several minutes later plug it in again.
Side control buttons do not work
Switch “Child Lock” to “Off”.
Some functions do not work.
It is not a malfunction. Some functions (dark background) in the menu do
not work depending on the situation.
Black or white dots appear on the screen.
LCD panels use fine dots (“pixels”) to display images. While more than
99.99% of these pixels function properly, a very small number of pixels
may not light, or may light all the time. It is not a malfunction.
No picture, No sound
Aspect ratio changed unintentionally
ZOOM
Press “ ” button to return to your settings.
PC screen alignment is off
Adjust the “PC Position” in “PC Setting” of Set Up menu.
Blue screen appears on the screen
Switch “Blue Back” to “Off”.
Some input do not output from OUTPUT terminal.
Subwoofer, No sound
Strange picture when using an external device
May be signal source is not low frequency bass signal.
Check subwoofer cable connected correctly.
Feedback sound symptoms
Keep the microphone away from the TV’s speakers.
Echo
If the top of the image is distorted, check the video signal quality itself.
If movement appears unnatural when receiving a signal from a DVD
player, etc. with 625p (progressive-scanning), change the output setting of
the external device to 625i (interlace-scanning).
Lower the sound level in “Microphone Volume” in order to prevent the echo.
5
Technical information
Sound and Colour system in your country or region
What is “Clear SD”
LCD picture is unstable due to a large number of signal noise. Such noise
appears extensively especially when an LCD displays SD signals. Clear SD
mode resolves disadvantage for better picture quality.
Area
Country or Region
Bahrain, Kuwait, Oman, Qatar, United Arab Emirates,
Yemen, Indonesia, Malaysia, Singapore, Thailand,
India, etc.
China, Vietnam, etc.
Hong Kong, etc.
System System
B/G
PAL
D/K
I
Asia,
Middle
East
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc.
Philippines, Taiwan, Myanmar, etc.
Russia, etc.
Czech Republic, Poland, etc.
Germany, Holland, Belgium, etc.
UK, etc.
B/G
M
SECAM
NTSC
SECAM
D/K
No use “Clear SD”
Use “Clear SD”
Europe
B/G
I
PAL
Connect “DVI” devices
Oceania Australia, New Zealand, etc.
Republic of South Africa, etc.
B/G
I
PAL
Connect a “DVI” device to “HDMI” using “DVI-HDMI” conversion cable.
Connect analogue sound output of the DVI device to L and R terminals in
INPUT VIDEO-2.
PAL
Africa
Nigeria, etc.
B/G
Egypt, Morocco, etc.
Agentina, Paraguay, Uruguay
Brazil
SECAM
PAL
• Set “Audio” in “HDMI Setting” to “Analogue” or “Auto”.
N
M
South
America
Chile, Peru, Bolivia, Colombia, Venezuela,
Ecuador, etc.
Language group for Teletext
M
NTSC
Group
Languages
Group-1 Turkish, Hungarian, English, German, French, Italian, Spanish,
Portuguese, Greek, Swedish, Finnish
PC Signals that can be displayed
Group-2 Polish, Serbian, Croatian, Slovenian, Czech, Slovak, Rumanian,
German, French
• If the signal doesn’t appear, check that the vertical frequency on the PC is
set to “60Hz”.
Group-3 Russian, Bulgarian, Lettish, Lithuanian, Estonian, Ukrainian,
Serbian, Croatian, Slovenian, Czech, Slovak, English, German
Resolution
640 x 480 (VGA) / 1024 x 768 (XGA)
60.0
Vertical frequency
Group-4 Arabic, Hungarian, English, German, French, Italian, Spanish,
Portuguese, Swedish, Finnish
* Machintosh* computers are not supported.
(Machintosh is a registered trademark of Apple Computer, Inc.)
Group-5 Farsi, Hungarian, English, German, French, Italian, Swedish,
Finnish
• If the characters are unreadable. ➡ Select different Teletext language
group.
Specification
Main unit
Terminals / Connectors
Area-1 B / G / I / D / K / M / N
Broadcasting systems
Terminal name
Terminal type
Signal type (IN)
Area-2 M / N
VIDEO-1
RCA connectors x 3 Composite video, Audio L/R
RCA connectors x 5 Composite video, Analogue
component 480i (525i) / 576i (625i),
Progressive : 480p (525p) / 576p
(625p),
Area-1 PAL / SECAM / NTSC 3.58 / NTSC 4.43 /
PAL-M / PAL-N
Colour systems
Area-2 NTSC 3.58 / PAL-M / PAL-N
VHF low channel (VL) = 46.25 to 140.25 MHz
Area-1 VHF high channel (VH) = 147.25 to 423.25 MHz
UHF channel (U) = 431.25 to 863.25 MHz
VHF low channel (VL) = 55.25 to 127.25 MHz
Area-2 VHF high channel (VH) = 133.25 to 361.25 MHz
UHF channel (U) = 367.25 to 801.25 MHz
Receives cable channels in mid band (X to Z+2, S1 to S10),
super band (S11 to S20) and hyper band (S21 to S41)
NICAM (I / B / G / D / K ), A2 (B / G / D / K)
MTS (Multi-channel Television Sound)
FLOF (Fastext), WST (World System Teletext)
AC 110 V - 240 V, 50/60Hz
VIDEO-2
HD : 720p (750p) / 1080i (1125i) /
1080p (1125p)
Audio L/R
Channels and
frequencies
HDMI connector x 1 HDMI 480i (525i) / 480p (525p) /
576i (625i) / 576p (625p) / 720p
(750p) / 1080i (1125i) / 1080p
(1125p)
Input
HDMI
terminals
Sound-multiplex
systems
Teletext systems
Power requirements
Audio output
PC INPUT
HDMI Analog /
DVI Analog / PC RCA connectors x 2 Audio L / R
Audio
D-SUB (15 pins) x 1 Analogue PC signal
6 W + 6 W
(Rated power output)
mini-jack x 1
Speakers
Power consumption
[standby]
[“Rocket Start” mode
standby]
Screen size
(visible area size
measured diagonally)
Dimensions
(W x H x D: mm)
[without stand]
Weights
(4 cm x 16 cm) x 2
Microphone
(3.5 mm in
diameter)
Microphone input
105 W
[0.7 W]
[16 W]
• HDMI Analog / DVI Analog / PC Audio use terminal common with
VIDEO-2.
• We may change the design and specifications without notice.
• HDMI, the HDMI Logo, and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.
80 cm
791.8 x 571.7 x 203.5
[791.8 x 520.5 x 103.9]
15 kg
[12 kg]
[without stand]
Power cord x 1
Remote control unit : RM-C2022 x 1
AAA/R03 dry cell battery x 2
Screw x 8
Accessories
6
|